Concrete Patio & Driveway Cost in Texas (2026)
Concrete Patio & Driveway in Texas runs about 2% below the national average. A typical 600 sq ft project starts around $3,530–$7,060 for standard broom finish. Estimate your exact project below.
Texas sits slightly below the national average on cost overall, though booming metros like Austin, Dallas, and Houston can run higher and keep trades in strong demand.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.
Concrete Patio & Driveway cost in Texas by material
Installed cost for a typical 600 sq ft project in Texas.
| Material | Per sq ft | Typical TX project |
|---|---|---|
| Standard broom finish | $5.9–$11.8 | $3,530 – $7,060 |
| Stamped / colored | $11.8–$19.6 | $7,060 – $11,760 |
| Paver equivalent | $14.7–$27.4 | $8,820 – $16,460 |
What affects your Texas cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Texas: local factors that move the price
Climate & weather
Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
Regional norms in Texas
Brick and stucco exteriors are common, with hail-rated roofing inland and wind-rated materials near the coast.
Best time to schedule
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times.
Permits & code
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions.
Texas concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Texas?
In Texas, a typical 600 sq ft concrete patio & driveway project runs about $3,530–$7,060 for standard broom finish, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Texas?
In Texas, installed concrete runs about $5.9–$27.4 per sq ft depending on material (standard broom finish $5.9–$11.8, stamped / colored $11.8–$19.6, paver equivalent $14.7–$27.4). That's about 2% below the national average.
Do I need a permit for concrete patio & driveway in Texas?
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Texas?
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times. Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.
Top cities in Texas
Metro-level concrete patio & driveway costs — usually a bit above the Texas state average.