Concrete Patio & Driveway Cost in Delaware (2026)
Concrete Patio & Driveway in Delaware runs about 5% above the national average. A typical 600 sq ft project starts around $3,780–$7,560 for standard broom finish. Estimate your exact project below.
Delaware runs modestly above the national average on cost, influenced by its position within the pricier Mid-Atlantic labor market.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Delaware.
Concrete Patio & Driveway cost in Delaware by material
Installed cost for a typical 600 sq ft project in Delaware.
| Material | Per sq ft | Typical DE project |
|---|---|---|
| Standard broom finish | $6.3–$12.6 | $3,780 – $7,560 |
| Stamped / colored | $12.6–$21.0 | $7,560 – $12,600 |
| Paver equivalent | $15.8–$29.4 | $9,450 – $17,640 |
What affects your Delaware cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Delaware: local factors that move the price
Climate & weather
Humid summers, cold winters, and coastal exposure along the Atlantic mean moisture management and wind resistance matter for exterior work. Low-lying coastal zones also carry flood considerations.
Regional norms in Delaware
Vinyl siding and asphalt-shingle roofs are common, with elevated construction near the shore.
Best time to schedule
Spring and fall provide the most comfortable conditions for outdoor projects.
Permits & code
Most Delaware jurisdictions require permits for structural and electrical work, and coastal flood-zone rules can apply near the shore.
Delaware concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Delaware?
In Delaware, a typical 600 sq ft concrete patio & driveway project runs about $3,780–$7,560 for standard broom finish, installed. That's about 5% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Delaware?
In Delaware, installed concrete runs about $6.3–$29.4 per sq ft depending on material (standard broom finish $6.3–$12.6, stamped / colored $12.6–$21.0, paver equivalent $15.8–$29.4). That's about 5% above the national average.
Do I need a permit for concrete patio & driveway in Delaware?
Most Delaware jurisdictions require permits for structural and electrical work, and coastal flood-zone rules can apply near the shore. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Delaware?
Spring and fall provide the most comfortable conditions for outdoor projects. Humid summers, cold winters, and coastal exposure along the Atlantic mean moisture management and wind resistance matter for exterior work. Low-lying coastal zones also carry flood considerations.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.