Concrete Patio & Driveway Cost in Connecticut (2026)
Concrete Patio & Driveway in Connecticut runs about 16% above the national average. A typical 600 sq ft project starts around $4,180–$8,350 for standard broom finish. Estimate your exact project below.
Connecticut is a high-cost state with expensive labor and a high cost of living, so homeowners should expect quotes noticeably above the national average.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Connecticut.
Concrete Patio & Driveway cost in Connecticut by material
Installed cost for a typical 600 sq ft project in Connecticut.
| Material | Per sq ft | Typical CT project |
|---|---|---|
| Standard broom finish | $7.0–$13.9 | $4,180 – $8,350 |
| Stamped / colored | $13.9–$23.2 | $8,350 – $13,920 |
| Paver equivalent | $17.4–$32.5 | $10,440 – $19,490 |
What affects your Connecticut cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Connecticut: local factors that move the price
Climate & weather
Cold, snowy winters and humid summers create freeze-thaw stress and moisture concerns, while coastal areas face nor'easters and storm surge. Good drainage, insulation, and weatherproofing are essential.
Regional norms in Connecticut
Traditional New England styles with wood clapboard, cedar shingle, and pitched roofs are common.
Best time to schedule
Late spring through fall is best for exterior work, before winter freeze sets in.
Permits & code
Connecticut jurisdictions generally require permits for structural, roofing, and electrical work, with coastal towns applying additional flood and wind provisions.
Connecticut concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Connecticut?
In Connecticut, a typical 600 sq ft concrete patio & driveway project runs about $4,180–$8,350 for standard broom finish, installed. That's about 16% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Connecticut?
In Connecticut, installed concrete runs about $7.0–$32.5 per sq ft depending on material (standard broom finish $7.0–$13.9, stamped / colored $13.9–$23.2, paver equivalent $17.4–$32.5). That's about 16% above the national average.
Do I need a permit for concrete patio & driveway in Connecticut?
Connecticut jurisdictions generally require permits for structural, roofing, and electrical work, with coastal towns applying additional flood and wind provisions. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Connecticut?
Late spring through fall is best for exterior work, before winter freeze sets in. Cold, snowy winters and humid summers create freeze-thaw stress and moisture concerns, while coastal areas face nor'easters and storm surge. Good drainage, insulation, and weatherproofing are essential.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.