AnyCosterEstimate a project
5% vs national

Concrete Patio & Driveway Cost in San Antonio (2026)

Concrete Patio & Driveway in San Antonio runs about 5% below the national average. A typical 600 sq ft project starts around $3,420$6,840 for standard broom finish. Estimate your exact San Antonio project below.

Concrete Patio & Driveway Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Length × width of the slab. A 2-car driveway is ~600 sq ft.

Estimated installed cost in Texas
$3,530$7,060
Typical $5,295 · Standard broom finish · 600 sq ft
$3,530$16,460

Ballpark estimate for planning — not a quote.

Get your exact price from local concrete pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Concrete Patio & Driveway cost in San Antonio by material

Installed cost for a typical 600 sq ft project in San Antonio.

MaterialPer sq ftTypical San Antonio project
Standard broom finish$5.7–$11.4$3,420$6,840
Stamped / colored$11.4–$19.0$6,840$11,400
Paver equivalent$14.3–$26.6$8,550$15,960

What affects your San Antonio cost

  • Finish (plain vs stamped/colored)
  • Slab thickness and rebar/mesh reinforcement
  • Site prep, grading and old-slab removal
  • Access for the concrete truck
  • Local labor and material prices

San Antonio concrete patio & driveway — FAQ

How much does concrete patio & driveway cost in San Antonio?

In San Antonio, a typical 600 sq ft concrete patio & driveway project runs about $3,420–$6,840 for standard broom finish, installed. That's about 5% below the national average — metro labor and permit costs in San Antonio tend to run higher than the Texas state average. Use the calculator above for your exact size and material.

How much does concrete patio & driveway cost per sq ft in San Antonio?

In San Antonio, installed concrete runs about $5.7–$26.6 per sq ft depending on material (standard broom finish $5.7–$11.4, stamped / colored $11.4–$19.0, paver equivalent $14.3–$26.6). That's about 5% below the national average.

How much does a concrete driveway cost in 2026?

A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.

Is stamped concrete worth the extra cost?

Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.

Concrete Patio & Driveway cost across Texas

San Antonio runs about 5% below the national average. See the full Texas breakdown and statewide averages.

Concrete Patio & Driveway cost in Texas