AnyCosterEstimate a project

Concrete Patio & Driveway Cost in Austin (2026)

Concrete Patio & Driveway in Austin runs about the same as the national average. A typical 600 sq ft project starts around $3,600$7,200 for standard broom finish. Estimate your exact Austin project below.

Concrete Patio & Driveway Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Length × width of the slab. A 2-car driveway is ~600 sq ft.

Estimated installed cost in Texas
$3,530$7,060
Typical $5,295 · Standard broom finish · 600 sq ft
$3,530$16,460

Ballpark estimate for planning — not a quote.

Get your exact price from local concrete pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Concrete Patio & Driveway cost in Austin by material

Installed cost for a typical 600 sq ft project in Austin.

MaterialPer sq ftTypical Austin project
Standard broom finish$6.0–$12.0$3,600$7,200
Stamped / colored$12.0–$20.0$7,200$12,000
Paver equivalent$15.0–$28.0$9,000$16,800

What affects your Austin cost

  • Finish (plain vs stamped/colored)
  • Slab thickness and rebar/mesh reinforcement
  • Site prep, grading and old-slab removal
  • Access for the concrete truck
  • Local labor and material prices

Austin concrete patio & driveway — FAQ

How much does concrete patio & driveway cost in Austin?

In Austin, a typical 600 sq ft concrete patio & driveway project runs about $3,600–$7,200 for standard broom finish, installed. That's about the same as the national average — metro labor and permit costs in Austin tend to run higher than the Texas state average. Use the calculator above for your exact size and material.

How much does concrete patio & driveway cost per sq ft in Austin?

In Austin, installed concrete runs about $6.0–$28.0 per sq ft depending on material (standard broom finish $6.0–$12.0, stamped / colored $12.0–$20.0, paver equivalent $15.0–$28.0). That's about the same as the national average.

How much does a concrete driveway cost in 2026?

A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.

Is stamped concrete worth the extra cost?

Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.

Concrete Patio & Driveway cost across Texas

Austin runs about the same as the national average. See the full Texas breakdown and statewide averages.

Concrete Patio & Driveway cost in Texas