AnyCosterEstimate a project
+15% vs national

Concrete Patio & Driveway Cost in Washington (2026)

Concrete Patio & Driveway in Washington runs about 15% above the national average. A typical 600 sq ft project starts around $4,140$8,280 for standard broom finish. Estimate your exact project below.

Concrete Patio & Driveway Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Length × width of the slab. A 2-car driveway is ~600 sq ft.

Estimated installed cost in Washington
$4,140$8,280
Typical $6,210 · Standard broom finish · 600 sq ft
$4,140$19,320

Ballpark estimate for planning — not a quote.

Get your exact price from local concrete pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Washington.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Concrete Patio & Driveway cost in Washington by material

Installed cost for a typical 600 sq ft project in Washington.

MaterialPer sq ftTypical WA project
Standard broom finish$6.9–$13.8$4,140$8,280
Stamped / colored$13.8–$23.0$8,280$13,800
Paver equivalent$17.3–$32.2$10,350$19,320

What affects your Washington cost

  • Finish (plain vs stamped/colored)
  • Slab thickness and rebar/mesh reinforcement
  • Site prep, grading and old-slab removal
  • Access for the concrete truck
  • Local labor and material prices

Washington concrete patio & driveway — FAQ

How much does concrete patio & driveway cost in Washington?

In Washington, a typical 600 sq ft concrete patio & driveway project runs about $4,140–$8,280 for standard broom finish, installed. That's about 15% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.

How much does concrete patio & driveway cost per sq ft in Washington?

In Washington, installed concrete runs about $6.9–$32.2 per sq ft depending on material (standard broom finish $6.9–$13.8, stamped / colored $13.8–$23.0, paver equivalent $17.3–$32.2). That's about 15% above the national average.

How much does a concrete driveway cost in 2026?

A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.

Is stamped concrete worth the extra cost?

Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.

Concrete Patio & Driveway cost in other states

← All concrete patio & drivewaycost info & all 50 states