Concrete Patio & Driveway Cost in Seattle (2026)
Concrete Patio & Driveway in Seattle runs about 18% above the national average. A typical 600 sq ft project starts around $4,250–$8,500 for standard broom finish. Estimate your exact Seattle project below.
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Washington.
Concrete Patio & Driveway cost in Seattle by material
Installed cost for a typical 600 sq ft project in Seattle.
| Material | Per sq ft | Typical Seattle project |
|---|---|---|
| Standard broom finish | $7.1–$14.2 | $4,250 – $8,500 |
| Stamped / colored | $14.2–$23.6 | $8,500 – $14,160 |
| Paver equivalent | $17.7–$33.0 | $10,620 – $19,820 |
What affects your Seattle cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Seattle concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Seattle?
In Seattle, a typical 600 sq ft concrete patio & driveway project runs about $4,250–$8,500 for standard broom finish, installed. That's about 18% above the national average — metro labor and permit costs in Seattle tend to run higher than the Washington state average. Use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Seattle?
In Seattle, installed concrete runs about $7.1–$33.0 per sq ft depending on material (standard broom finish $7.1–$14.2, stamped / colored $14.2–$23.6, paver equivalent $17.7–$33.0). That's about 18% above the national average.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.
Concrete Patio & Driveway cost across Washington
Seattle runs about 18% above the national average. See the full Washington breakdown and statewide averages.
← Concrete Patio & Driveway cost in Washington