Concrete Patio & Driveway Cost in North Carolina (2026)
Concrete Patio & Driveway in North Carolina runs about 4% below the national average. A typical 600 sq ft project starts around $3,460–$6,910 for standard broom finish. Estimate your exact project below.
North Carolina runs slightly below the national average on cost, with active labor markets in the Charlotte and Raleigh areas keeping trades reasonably available.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in North Carolina.
Concrete Patio & Driveway cost in North Carolina by material
Installed cost for a typical 600 sq ft project in North Carolina.
| Material | Per sq ft | Typical NC project |
|---|---|---|
| Standard broom finish | $5.8–$11.5 | $3,460 – $6,910 |
| Stamped / colored | $11.5–$19.2 | $6,910 – $11,520 |
| Paver equivalent | $14.4–$26.9 | $8,640 – $16,130 |
What affects your North Carolina cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in North Carolina: local factors that move the price
Climate & weather
Humid summers and heavy rain favor mildew-resistant finishes and good drainage, while the coast faces hurricane and wind exposure and the mountains see more cold and snow. Conditions vary from coast to Appalachians.
Regional norms in North Carolina
Brick veneer and vinyl siding are common, with wind-rated materials favored near the coast.
Best time to schedule
Fall and spring offer the most comfortable conditions across most of the state.
Permits & code
North Carolina enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with coastal wind provisions near the shore.
North Carolina concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in North Carolina?
In North Carolina, a typical 600 sq ft concrete patio & driveway project runs about $3,460–$6,910 for standard broom finish, installed. That's about 4% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in North Carolina?
In North Carolina, installed concrete runs about $5.8–$26.9 per sq ft depending on material (standard broom finish $5.8–$11.5, stamped / colored $11.5–$19.2, paver equivalent $14.4–$26.9). That's about 4% below the national average.
Do I need a permit for concrete patio & driveway in North Carolina?
North Carolina enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with coastal wind provisions near the shore. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in North Carolina?
Fall and spring offer the most comfortable conditions across most of the state. Humid summers and heavy rain favor mildew-resistant finishes and good drainage, while the coast faces hurricane and wind exposure and the mountains see more cold and snow. Conditions vary from coast to Appalachians.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.
Top cities in North Carolina
Metro-level concrete patio & driveway costs — usually a bit above the North Carolina state average.