AnyCosterEstimate a project
4% vs national

Concrete Patio & Driveway Cost in Charlotte (2026)

Concrete Patio & Driveway in Charlotte runs about 4% below the national average. A typical 600 sq ft project starts around $3,460$6,910 for standard broom finish. Estimate your exact Charlotte project below.

Concrete Patio & Driveway Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Length × width of the slab. A 2-car driveway is ~600 sq ft.

Estimated installed cost in North Carolina
$3,460$6,910
Typical $5,185 · Standard broom finish · 600 sq ft
$3,460$16,130

Ballpark estimate for planning — not a quote.

Get your exact price from local concrete pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in North Carolina.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Concrete Patio & Driveway cost in Charlotte by material

Installed cost for a typical 600 sq ft project in Charlotte.

MaterialPer sq ftTypical Charlotte project
Standard broom finish$5.8–$11.5$3,460$6,910
Stamped / colored$11.5–$19.2$6,910$11,520
Paver equivalent$14.4–$26.9$8,640$16,130

What affects your Charlotte cost

  • Finish (plain vs stamped/colored)
  • Slab thickness and rebar/mesh reinforcement
  • Site prep, grading and old-slab removal
  • Access for the concrete truck
  • Local labor and material prices

Charlotte concrete patio & driveway — FAQ

How much does concrete patio & driveway cost in Charlotte?

In Charlotte, a typical 600 sq ft concrete patio & driveway project runs about $3,460–$6,910 for standard broom finish, installed. That's about 4% below the national average — metro labor and permit costs in Charlotte tend to run higher than the North Carolina state average. Use the calculator above for your exact size and material.

How much does concrete patio & driveway cost per sq ft in Charlotte?

In Charlotte, installed concrete runs about $5.8–$26.9 per sq ft depending on material (standard broom finish $5.8–$11.5, stamped / colored $11.5–$19.2, paver equivalent $14.4–$26.9). That's about 4% below the national average.

How much does a concrete driveway cost in 2026?

A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.

Is stamped concrete worth the extra cost?

Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.

Concrete Patio & Driveway cost across North Carolina

Charlotte runs about 4% below the national average. See the full North Carolina breakdown and statewide averages.

Concrete Patio & Driveway cost in North Carolina