Concrete Patio & Driveway Cost in Wyoming (2026)
Concrete Patio & Driveway in Wyoming runs about 2% below the national average. A typical 600 sq ft project starts around $3,530–$7,060 for standard broom finish. Estimate your exact project below.
Wyoming sits just below the national average on cost, though rural logistics and long shipping distances can raise material prices in remote areas.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Wyoming.
Concrete Patio & Driveway cost in Wyoming by material
Installed cost for a typical 600 sq ft project in Wyoming.
| Material | Per sq ft | Typical WY project |
|---|---|---|
| Standard broom finish | $5.9–$11.8 | $3,530 – $7,060 |
| Stamped / colored | $11.8–$19.6 | $7,060 – $11,760 |
| Paver equivalent | $14.7–$27.4 | $8,820 – $16,460 |
What affects your Wyoming cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Wyoming: local factors that move the price
Climate & weather
Cold, snowy winters, strong persistent winds, and big temperature swings make snow-load-ready roofs, wind-rated materials, and heavy insulation important. High-elevation UV adds finish wear.
Regional norms in Wyoming
Pitched roofs built for snow, wind-resistant siding, and heavy insulation suit the climate.
Best time to schedule
Late spring through early fall is the practical window before winter arrives.
Permits & code
Permit requirements vary widely between towns and unincorporated areas, with snow-load and wind provisions central where codes apply.
Wyoming concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Wyoming?
In Wyoming, a typical 600 sq ft concrete patio & driveway project runs about $3,530–$7,060 for standard broom finish, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Wyoming?
In Wyoming, installed concrete runs about $5.9–$27.4 per sq ft depending on material (standard broom finish $5.9–$11.8, stamped / colored $11.8–$19.6, paver equivalent $14.7–$27.4). That's about 2% below the national average.
Do I need a permit for concrete patio & driveway in Wyoming?
Permit requirements vary widely between towns and unincorporated areas, with snow-load and wind provisions central where codes apply. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Wyoming?
Late spring through early fall is the practical window before winter arrives. Cold, snowy winters, strong persistent winds, and big temperature swings make snow-load-ready roofs, wind-rated materials, and heavy insulation important. High-elevation UV adds finish wear.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.