Concrete Patio & Driveway Cost in Virginia (2026)
Concrete Patio & Driveway in Virginia runs about 5% above the national average. A typical 600 sq ft project starts around $3,780–$7,560 for standard broom finish. Estimate your exact project below.
Virginia runs modestly above the national average on cost, pushed by the pricier Northern Virginia labor market near Washington, D.C., while other regions are more affordable.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Virginia.
Concrete Patio & Driveway cost in Virginia by material
Installed cost for a typical 600 sq ft project in Virginia.
| Material | Per sq ft | Typical VA project |
|---|---|---|
| Standard broom finish | $6.3–$12.6 | $3,780 – $7,560 |
| Stamped / colored | $12.6–$21.0 | $7,560 – $12,600 |
| Paver equivalent | $15.8–$29.4 | $9,450 – $17,640 |
What affects your Virginia cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Virginia: local factors that move the price
Climate & weather
Humid summers, cool winters, and coastal exposure in the Tidewater region bring moisture, freeze-thaw, and hurricane and flood considerations, while the mountains see more cold and snow. Conditions range from coast to Appalachians.
Regional norms in Virginia
Brick and vinyl siding are common, with elevated and wind-aware construction near the coast.
Best time to schedule
Spring and fall provide the most comfortable conditions for exterior projects.
Permits & code
Virginia enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with coastal flood provisions near the shore.
Virginia concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Virginia?
In Virginia, a typical 600 sq ft concrete patio & driveway project runs about $3,780–$7,560 for standard broom finish, installed. That's about 5% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Virginia?
In Virginia, installed concrete runs about $6.3–$29.4 per sq ft depending on material (standard broom finish $6.3–$12.6, stamped / colored $12.6–$21.0, paver equivalent $15.8–$29.4). That's about 5% above the national average.
Do I need a permit for concrete patio & driveway in Virginia?
Virginia enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with coastal flood provisions near the shore. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Virginia?
Spring and fall provide the most comfortable conditions for exterior projects. Humid summers, cool winters, and coastal exposure in the Tidewater region bring moisture, freeze-thaw, and hurricane and flood considerations, while the mountains see more cold and snow. Conditions range from coast to Appalachians.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.