Concrete Patio & Driveway Cost in Vermont (2026)
Concrete Patio & Driveway in Vermont runs about 10% above the national average. A typical 600 sq ft project starts around $3,960–$7,920 for standard broom finish. Estimate your exact project below.
Vermont runs above the national average on cost, with rural logistics, a limited seasonal labor pool, and a higher cost of living adding to prices.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Vermont.
Concrete Patio & Driveway cost in Vermont by material
Installed cost for a typical 600 sq ft project in Vermont.
| Material | Per sq ft | Typical VT project |
|---|---|---|
| Standard broom finish | $6.6–$13.2 | $3,960 – $7,920 |
| Stamped / colored | $13.2–$22.0 | $7,920 – $13,200 |
| Paver equivalent | $16.5–$30.8 | $9,900 – $18,480 |
What affects your Vermont cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Vermont: local factors that move the price
Climate & weather
Long, cold, snowy winters and mountainous terrain make heavy snow loads, deep frost, and freeze-thaw central to exterior design. The short warm season compresses the building calendar.
Regional norms in Vermont
Steep snow-shedding roofs, durable siding, and heavy insulation suit the northern climate.
Best time to schedule
The late-spring-through-early-fall window is the practical season for most exterior and foundation work.
Permits & code
Permit requirements vary between towns, with structural and electrical work generally requiring approval and statewide energy and shoreland provisions relevant.
Vermont concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Vermont?
In Vermont, a typical 600 sq ft concrete patio & driveway project runs about $3,960–$7,920 for standard broom finish, installed. That's about 10% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Vermont?
In Vermont, installed concrete runs about $6.6–$30.8 per sq ft depending on material (standard broom finish $6.6–$13.2, stamped / colored $13.2–$22.0, paver equivalent $16.5–$30.8). That's about 10% above the national average.
Do I need a permit for concrete patio & driveway in Vermont?
Permit requirements vary between towns, with structural and electrical work generally requiring approval and statewide energy and shoreland provisions relevant. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Vermont?
The late-spring-through-early-fall window is the practical season for most exterior and foundation work. Long, cold, snowy winters and mountainous terrain make heavy snow loads, deep frost, and freeze-thaw central to exterior design. The short warm season compresses the building calendar.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.