Concrete Patio & Driveway Cost in Utah (2026)
Concrete Patio & Driveway in Utah runs about the same as the national average. A typical 600 sq ft project starts around $3,600–$7,200 for standard broom finish. Estimate your exact project below.
Utah sits right around the national average on cost, though rapid growth along the Wasatch Front has tightened the labor market in recent years.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Utah.
Concrete Patio & Driveway cost in Utah by material
Installed cost for a typical 600 sq ft project in Utah.
| Material | Per sq ft | Typical UT project |
|---|---|---|
| Standard broom finish | $6.0–$12.0 | $3,600 – $7,200 |
| Stamped / colored | $12.0–$20.0 | $7,200 – $12,000 |
| Paver equivalent | $15.0–$28.0 | $9,000 – $16,800 |
What affects your Utah cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Utah: local factors that move the price
Climate & weather
Cold, snowy winters and hot, dry summers bring freeze-thaw cycles and strong UV exposure, so snow-load-ready roofs and durable finishes matter. Mountain areas see heavier snow.
Regional norms in Utah
Pitched roofs built for snow, durable siding, and well-insulated envelopes suit the climate.
Best time to schedule
Late spring through early fall is the practical window before winter snow arrives.
Permits & code
Most Utah jurisdictions require permits for structural, roofing, and mechanical work, with snow-load provisions central at higher elevations.
Utah concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Utah?
In Utah, a typical 600 sq ft concrete patio & driveway project runs about $3,600–$7,200 for standard broom finish, installed. That's about the same as the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Utah?
In Utah, installed concrete runs about $6.0–$28.0 per sq ft depending on material (standard broom finish $6.0–$12.0, stamped / colored $12.0–$20.0, paver equivalent $15.0–$28.0). That's about the same as the national average.
Do I need a permit for concrete patio & driveway in Utah?
Most Utah jurisdictions require permits for structural, roofing, and mechanical work, with snow-load provisions central at higher elevations. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Utah?
Late spring through early fall is the practical window before winter snow arrives. Cold, snowy winters and hot, dry summers bring freeze-thaw cycles and strong UV exposure, so snow-load-ready roofs and durable finishes matter. Mountain areas see heavier snow.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.