Concrete Patio & Driveway Cost in South Carolina (2026)
Concrete Patio & Driveway in South Carolina runs about 7% below the national average. A typical 600 sq ft project starts around $3,350–$6,700 for standard broom finish. Estimate your exact project below.
South Carolina runs below the national average on cost, with a moderate cost of living and growing coastal and Upstate labor markets.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in South Carolina.
Concrete Patio & Driveway cost in South Carolina by material
Installed cost for a typical 600 sq ft project in South Carolina.
| Material | Per sq ft | Typical SC project |
|---|---|---|
| Standard broom finish | $5.6–$11.2 | $3,350 – $6,700 |
| Stamped / colored | $11.2–$18.6 | $6,700 – $11,160 |
| Paver equivalent | $14.0–$26.0 | $8,370 – $15,620 |
What affects your South Carolina cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in South Carolina: local factors that move the price
Climate & weather
Hot, humid summers, heavy rain, and Atlantic hurricane exposure make moisture control and wind resistance essential, especially along the coast. Termite pressure and mildew are ongoing concerns.
Regional norms in South Carolina
Brick and vinyl siding are common, with wind-rated materials and elevated construction favored near the coast.
Best time to schedule
Fall and early spring are the most comfortable windows, ahead of peak humidity and hurricane season.
Permits & code
South Carolina jurisdictions generally require permits for structural, roofing, and electrical work, with coastal wind and flood provisions near the shore.
South Carolina concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in South Carolina?
In South Carolina, a typical 600 sq ft concrete patio & driveway project runs about $3,350–$6,700 for standard broom finish, installed. That's about 7% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in South Carolina?
In South Carolina, installed concrete runs about $5.6–$26.0 per sq ft depending on material (standard broom finish $5.6–$11.2, stamped / colored $11.2–$18.6, paver equivalent $14.0–$26.0). That's about 7% below the national average.
Do I need a permit for concrete patio & driveway in South Carolina?
South Carolina jurisdictions generally require permits for structural, roofing, and electrical work, with coastal wind and flood provisions near the shore. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in South Carolina?
Fall and early spring are the most comfortable windows, ahead of peak humidity and hurricane season. Hot, humid summers, heavy rain, and Atlantic hurricane exposure make moisture control and wind resistance essential, especially along the coast. Termite pressure and mildew are ongoing concerns.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.