Concrete Patio & Driveway Cost in Rhode Island (2026)
Concrete Patio & Driveway in Rhode Island runs about 13% above the national average. A typical 600 sq ft project starts around $4,070–$8,140 for standard broom finish. Estimate your exact project below.
Rhode Island runs above the national average on cost, reflecting a higher regional cost of living and a limited local labor pool.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Rhode Island.
Concrete Patio & Driveway cost in Rhode Island by material
Installed cost for a typical 600 sq ft project in Rhode Island.
| Material | Per sq ft | Typical RI project |
|---|---|---|
| Standard broom finish | $6.8–$13.6 | $4,070 – $8,140 |
| Stamped / colored | $13.6–$22.6 | $8,140 – $13,560 |
| Paver equivalent | $16.9–$31.6 | $10,170 – $18,980 |
What affects your Rhode Island cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Rhode Island: local factors that move the price
Climate & weather
Cold, snowy winters, humid summers, and Atlantic coastal exposure make freeze-thaw, moisture, and nor'easter and surge risk key concerns. Salt air also accelerates corrosion near the shore.
Regional norms in Rhode Island
Traditional New England styles with wood clapboard, shingles, and pitched roofs are common.
Best time to schedule
Late spring through fall is the practical window before winter freeze.
Permits & code
Most Rhode Island jurisdictions require permits for structural, roofing, and electrical work, with coastal flood and wind provisions near the shore.
Rhode Island concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Rhode Island?
In Rhode Island, a typical 600 sq ft concrete patio & driveway project runs about $4,070–$8,140 for standard broom finish, installed. That's about 13% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Rhode Island?
In Rhode Island, installed concrete runs about $6.8–$31.6 per sq ft depending on material (standard broom finish $6.8–$13.6, stamped / colored $13.6–$22.6, paver equivalent $16.9–$31.6). That's about 13% above the national average.
Do I need a permit for concrete patio & driveway in Rhode Island?
Most Rhode Island jurisdictions require permits for structural, roofing, and electrical work, with coastal flood and wind provisions near the shore. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Rhode Island?
Late spring through fall is the practical window before winter freeze. Cold, snowy winters, humid summers, and Atlantic coastal exposure make freeze-thaw, moisture, and nor'easter and surge risk key concerns. Salt air also accelerates corrosion near the shore.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.