Concrete Patio & Driveway Cost in Ohio (2026)
Concrete Patio & Driveway in Ohio runs about 2% below the national average. A typical 600 sq ft project starts around $3,530–$7,060 for standard broom finish. Estimate your exact project below.
Ohio runs slightly below the national average on cost, with an affordable cost of living and a broad skilled-trade base.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Ohio.
Concrete Patio & Driveway cost in Ohio by material
Installed cost for a typical 600 sq ft project in Ohio.
| Material | Per sq ft | Typical OH project |
|---|---|---|
| Standard broom finish | $5.9–$11.8 | $3,530 – $7,060 |
| Stamped / colored | $11.8–$19.6 | $7,060 – $11,760 |
| Paver equivalent | $14.7–$27.4 | $8,820 – $16,460 |
What affects your Ohio cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Ohio: local factors that move the price
Climate & weather
Cold, snowy winters and humid summers create freeze-thaw stress, and lake-effect snow in the north adds heavier snow loads. Moisture management and insulation both matter.
Regional norms in Ohio
Brick and vinyl siding with pitched roofs are common across the state.
Best time to schedule
Spring and fall offer the most stable conditions for exterior projects.
Permits & code
Most Ohio jurisdictions require permits for structural, roofing, and electrical work, with requirements varying between cities and counties.
Ohio concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Ohio?
In Ohio, a typical 600 sq ft concrete patio & driveway project runs about $3,530–$7,060 for standard broom finish, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Ohio?
In Ohio, installed concrete runs about $5.9–$27.4 per sq ft depending on material (standard broom finish $5.9–$11.8, stamped / colored $11.8–$19.6, paver equivalent $14.7–$27.4). That's about 2% below the national average.
Do I need a permit for concrete patio & driveway in Ohio?
Most Ohio jurisdictions require permits for structural, roofing, and electrical work, with requirements varying between cities and counties. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Ohio?
Spring and fall offer the most stable conditions for exterior projects. Cold, snowy winters and humid summers create freeze-thaw stress, and lake-effect snow in the north adds heavier snow loads. Moisture management and insulation both matter.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.