Concrete Patio & Driveway Cost in New Hampshire (2026)
Concrete Patio & Driveway in New Hampshire runs about 8% above the national average. A typical 600 sq ft project starts around $3,890–$7,780 for standard broom finish. Estimate your exact project below.
New Hampshire runs above the national average on cost, reflecting a higher cost of living and a limited regional labor pool.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in New Hampshire.
Concrete Patio & Driveway cost in New Hampshire by material
Installed cost for a typical 600 sq ft project in New Hampshire.
| Material | Per sq ft | Typical NH project |
|---|---|---|
| Standard broom finish | $6.5–$13.0 | $3,890 – $7,780 |
| Stamped / colored | $13.0–$21.6 | $7,780 – $12,960 |
| Paver equivalent | $16.2–$30.2 | $9,720 – $18,140 |
What affects your New Hampshire cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in New Hampshire: local factors that move the price
Climate & weather
Cold, snowy winters and humid summers create heavy snow loads and freeze-thaw stress, so snow-ready roofs and strong insulation matter. Mountain areas see even harsher conditions.
Regional norms in New Hampshire
Traditional New England styles with wood siding, shingles, and steep pitched roofs are common.
Best time to schedule
Late spring through fall is the reliable window before winter freeze.
Permits & code
Permit requirements vary between towns, with structural and electrical work generally requiring approval and shoreland provisions applying near water.
New Hampshire concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in New Hampshire?
In New Hampshire, a typical 600 sq ft concrete patio & driveway project runs about $3,890–$7,780 for standard broom finish, installed. That's about 8% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in New Hampshire?
In New Hampshire, installed concrete runs about $6.5–$30.2 per sq ft depending on material (standard broom finish $6.5–$13.0, stamped / colored $13.0–$21.6, paver equivalent $16.2–$30.2). That's about 8% above the national average.
Do I need a permit for concrete patio & driveway in New Hampshire?
Permit requirements vary between towns, with structural and electrical work generally requiring approval and shoreland provisions applying near water. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in New Hampshire?
Late spring through fall is the reliable window before winter freeze. Cold, snowy winters and humid summers create heavy snow loads and freeze-thaw stress, so snow-ready roofs and strong insulation matter. Mountain areas see even harsher conditions.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.