Concrete Patio & Driveway Cost in Missouri (2026)
Concrete Patio & Driveway in Missouri runs about 5% below the national average. A typical 600 sq ft project starts around $3,420–$6,840 for standard broom finish. Estimate your exact project below.
Missouri runs below the national average on cost, with an affordable cost of living across most of the state.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Missouri.
Concrete Patio & Driveway cost in Missouri by material
Installed cost for a typical 600 sq ft project in Missouri.
| Material | Per sq ft | Typical MO project |
|---|---|---|
| Standard broom finish | $5.7–$11.4 | $3,420 – $6,840 |
| Stamped / colored | $11.4–$19.0 | $6,840 – $11,400 |
| Paver equivalent | $14.3–$26.6 | $8,550 – $15,960 |
What affects your Missouri cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Missouri: local factors that move the price
Climate & weather
Hot, humid summers, cold winters, and a location prone to severe storms and tornadoes make wind resistance and moisture management relevant. Freeze-thaw and heavy rain both stress exterior finishes.
Regional norms in Missouri
Brick and vinyl siding are common, with wind-resistant roofing a practical choice in storm-prone areas.
Best time to schedule
Fall and spring offer the most stable conditions for outdoor projects.
Permits & code
Permit requirements vary by city and county, with structural and electrical work commonly requiring approval.
Missouri concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Missouri?
In Missouri, a typical 600 sq ft concrete patio & driveway project runs about $3,420–$6,840 for standard broom finish, installed. That's about 5% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Missouri?
In Missouri, installed concrete runs about $5.7–$26.6 per sq ft depending on material (standard broom finish $5.7–$11.4, stamped / colored $11.4–$19.0, paver equivalent $14.3–$26.6). That's about 5% below the national average.
Do I need a permit for concrete patio & driveway in Missouri?
Permit requirements vary by city and county, with structural and electrical work commonly requiring approval. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Missouri?
Fall and spring offer the most stable conditions for outdoor projects. Hot, humid summers, cold winters, and a location prone to severe storms and tornadoes make wind resistance and moisture management relevant. Freeze-thaw and heavy rain both stress exterior finishes.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.