Concrete Patio & Driveway Cost in Michigan (2026)
Concrete Patio & Driveway in Michigan runs about 2% above the national average. A typical 600 sq ft project starts around $3,670–$7,340 for standard broom finish. Estimate your exact project below.
Michigan sits close to the national average on cost, with a skilled trade base and cost of living that keep prices moderate outside the pricier metro Detroit area.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Michigan.
Concrete Patio & Driveway cost in Michigan by material
Installed cost for a typical 600 sq ft project in Michigan.
| Material | Per sq ft | Typical MI project |
|---|---|---|
| Standard broom finish | $6.1–$12.2 | $3,670 – $7,340 |
| Stamped / colored | $12.2–$20.4 | $7,340 – $12,240 |
| Paver equivalent | $15.3–$28.6 | $9,180 – $17,140 |
What affects your Michigan cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Michigan: local factors that move the price
Climate & weather
Cold, snowy winters and lake-effect snow bring heavy snow loads and pronounced freeze-thaw stress, while humid summers add moisture concerns. Well-insulated envelopes and snow-ready roofs are important.
Regional norms in Michigan
Vinyl and brick exteriors with steeply pitched roofs are common across the state.
Best time to schedule
Late spring through early fall is the practical window before winter snow returns.
Permits & code
Most Michigan jurisdictions require permits for structural, roofing, and electrical work, with energy-efficiency provisions relevant in the cold climate.
Michigan concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Michigan?
In Michigan, a typical 600 sq ft concrete patio & driveway project runs about $3,670–$7,340 for standard broom finish, installed. That's about 2% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Michigan?
In Michigan, installed concrete runs about $6.1–$28.6 per sq ft depending on material (standard broom finish $6.1–$12.2, stamped / colored $12.2–$20.4, paver equivalent $15.3–$28.6). That's about 2% above the national average.
Do I need a permit for concrete patio & driveway in Michigan?
Most Michigan jurisdictions require permits for structural, roofing, and electrical work, with energy-efficiency provisions relevant in the cold climate. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Michigan?
Late spring through early fall is the practical window before winter snow returns. Cold, snowy winters and lake-effect snow bring heavy snow loads and pronounced freeze-thaw stress, while humid summers add moisture concerns. Well-insulated envelopes and snow-ready roofs are important.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.