Concrete Patio & Driveway Cost in Kansas (2026)
Concrete Patio & Driveway in Kansas runs about 7% below the national average. A typical 600 sq ft project starts around $3,350–$6,700 for standard broom finish. Estimate your exact project below.
Kansas runs below the national average on cost, with an affordable cost of living keeping most project quotes moderate.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Kansas.
Concrete Patio & Driveway cost in Kansas by material
Installed cost for a typical 600 sq ft project in Kansas.
| Material | Per sq ft | Typical KS project |
|---|---|---|
| Standard broom finish | $5.6–$11.2 | $3,350 – $6,700 |
| Stamped / colored | $11.2–$18.6 | $6,700 – $11,160 |
| Paver equivalent | $14.0–$26.0 | $8,370 – $15,620 |
What affects your Kansas cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Kansas: local factors that move the price
Climate & weather
Hot summers, cold winters, and a firmly Tornado Alley location make high-wind and hail resistance central to exterior work. Impact-rated roofing is a common and practical choice here.
Regional norms in Kansas
Vinyl and brick exteriors are common, with wind- and hail-rated roofing widely used.
Best time to schedule
Fall generally offers the calmest, most stable weather, avoiding peak spring and summer storm season.
Permits & code
Permit requirements vary by city and county, with structural and electrical work commonly requiring approval.
Kansas concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Kansas?
In Kansas, a typical 600 sq ft concrete patio & driveway project runs about $3,350–$6,700 for standard broom finish, installed. That's about 7% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Kansas?
In Kansas, installed concrete runs about $5.6–$26.0 per sq ft depending on material (standard broom finish $5.6–$11.2, stamped / colored $11.2–$18.6, paver equivalent $14.0–$26.0). That's about 7% below the national average.
Do I need a permit for concrete patio & driveway in Kansas?
Permit requirements vary by city and county, with structural and electrical work commonly requiring approval. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Kansas?
Fall generally offers the calmest, most stable weather, avoiding peak spring and summer storm season. Hot summers, cold winters, and a firmly Tornado Alley location make high-wind and hail resistance central to exterior work. Impact-rated roofing is a common and practical choice here.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.