Concrete Patio & Driveway Cost in Indiana (2026)
Concrete Patio & Driveway in Indiana runs about 4% below the national average. A typical 600 sq ft project starts around $3,460–$6,910 for standard broom finish. Estimate your exact project below.
Indiana runs slightly below the national average on cost, supported by an affordable cost of living and a steady Midwestern labor market.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Indiana.
Concrete Patio & Driveway cost in Indiana by material
Installed cost for a typical 600 sq ft project in Indiana.
| Material | Per sq ft | Typical IN project |
|---|---|---|
| Standard broom finish | $5.8–$11.5 | $3,460 – $6,910 |
| Stamped / colored | $11.5–$19.2 | $6,910 – $11,520 |
| Paver equivalent | $14.4–$26.9 | $8,640 – $16,130 |
What affects your Indiana cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Indiana: local factors that move the price
Climate & weather
Cold winters and humid summers bring freeze-thaw cycles, and the state's location in a storm- and tornado-prone corridor makes wind resistance a genuine consideration. Moisture and temperature swings both stress exterior finishes.
Regional norms in Indiana
Brick and vinyl siding predominate, with pitched roofs suited to snow and rain.
Best time to schedule
Spring and fall offer the most stable conditions for outdoor projects.
Permits & code
Most Indiana jurisdictions require permits for structural and electrical work, with requirements varying between cities and rural counties.
Indiana concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Indiana?
In Indiana, a typical 600 sq ft concrete patio & driveway project runs about $3,460–$6,910 for standard broom finish, installed. That's about 4% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Indiana?
In Indiana, installed concrete runs about $5.8–$26.9 per sq ft depending on material (standard broom finish $5.8–$11.5, stamped / colored $11.5–$19.2, paver equivalent $14.4–$26.9). That's about 4% below the national average.
Do I need a permit for concrete patio & driveway in Indiana?
Most Indiana jurisdictions require permits for structural and electrical work, with requirements varying between cities and rural counties. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Indiana?
Spring and fall offer the most stable conditions for outdoor projects. Cold winters and humid summers bring freeze-thaw cycles, and the state's location in a storm- and tornado-prone corridor makes wind resistance a genuine consideration. Moisture and temperature swings both stress exterior finishes.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.