Concrete Patio & Driveway Cost in Hawaii (2026)
Concrete Patio & Driveway in Hawaii runs about 32% above the national average. A typical 600 sq ft project starts around $4,750–$9,500 for standard broom finish. Estimate your exact project below.
Hawaii is the most expensive state for home projects in the country, driven by shipped-in materials, limited local supply, and high labor and living costs, so quotes run far above the national average.
Reviewed by the AnyCoster Research Team · How we estimate costs
Concrete Patio & Driveway Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the slab. A 2-car driveway is ~600 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local concrete pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Hawaii.
Concrete Patio & Driveway cost in Hawaii by material
Installed cost for a typical 600 sq ft project in Hawaii.
| Material | Per sq ft | Typical HI project |
|---|---|---|
| Standard broom finish | $7.9–$15.8 | $4,750 – $9,500 |
| Stamped / colored | $15.8–$26.4 | $9,500 – $15,840 |
| Paver equivalent | $19.8–$37.0 | $11,880 – $22,180 |
What affects your Hawaii cost
- Finish (plain vs stamped/colored)
- Slab thickness and rebar/mesh reinforcement
- Site prep, grading and old-slab removal
- Access for the concrete truck
- Local labor and material prices
Concrete Patio & Driveway in Hawaii: local factors that move the price
Climate & weather
Salt air, high humidity, intense sun, and heavy rain on windward sides accelerate corrosion and wear, so corrosion-resistant fasteners and finishes are essential. Volcanic and tropical-storm exposure varies by island.
Regional norms in Hawaii
Single-wall and post-and-pier construction, metal-resistant hardware, and moisture-tolerant materials are common.
Best time to schedule
The drier summer months are generally best for exterior work, though microclimates vary sharply by island and elevation.
Permits & code
Hawaii's counties require permits for most structural and electrical work, and material logistics can lengthen project timelines considerably.
Hawaii concrete patio & driveway — FAQ
How much does concrete patio & driveway cost in Hawaii?
In Hawaii, a typical 600 sq ft concrete patio & driveway project runs about $4,750–$9,500 for standard broom finish, installed. That's about 32% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does concrete patio & driveway cost per sq ft in Hawaii?
In Hawaii, installed concrete runs about $7.9–$37.0 per sq ft depending on material (standard broom finish $7.9–$15.8, stamped / colored $15.8–$26.4, paver equivalent $19.8–$37.0). That's about 32% above the national average.
Do I need a permit for concrete patio & driveway in Hawaii?
Hawaii's counties require permits for most structural and electrical work, and material logistics can lengthen project timelines considerably. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do concrete patio & driveway in Hawaii?
The drier summer months are generally best for exterior work, though microclimates vary sharply by island and elevation. Salt air, high humidity, intense sun, and heavy rain on windward sides accelerate corrosion and wear, so corrosion-resistant fasteners and finishes are essential. Volcanic and tropical-storm exposure varies by island.
How much does a concrete driveway cost in 2026?
A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.
Is stamped concrete worth the extra cost?
Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.