Siding Replacement Cost in Texas (2026)
Siding Replacement in Texas runs about 2% below the national average. A typical 1,500 sq ft project starts around $7,350–$14,700 for vinyl siding. Estimate your exact project below.
Texas sits slightly below the national average on cost overall, though booming metros like Austin, Dallas, and Houston can run higher and keep trades in strong demand.
Reviewed by the AnyCoster Research Team · How we estimate costs
Siding Replacement Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Typically 1.1–1.5× your home's floor area for the exterior walls.
Ballpark estimate for planning — not a quote.
Get your exact price from local siding pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.
Siding Replacement cost in Texas by material
Installed cost for a typical 1,500 sq ft project in Texas.
| Material | Per sq ft | Typical TX project |
|---|---|---|
| Vinyl siding | $4.9–$9.8 | $7,350 – $14,700 |
| Engineered wood | $7.8–$13.7 | $11,760 – $20,580 |
| Fiber cement (Hardie) | $8.8–$15.7 | $13,230 – $23,520 |
What affects your Texas cost
- Material grade and trim details
- Removal/disposal of old siding
- Wall repairs, house wrap and insulation
- Number of stories and home complexity (corners, gables)
- Local labor rates
Siding Replacement in Texas: local factors that move the price
Climate & weather
Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
Regional norms in Texas
Brick and stucco exteriors are common, with hail-rated roofing inland and wind-rated materials near the coast.
Best time to schedule
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times.
Permits & code
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions.
Texas siding replacement — FAQ
How much does siding replacement cost in Texas?
In Texas, a typical 1,500 sq ft siding replacement project runs about $7,350–$14,700 for vinyl siding, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does siding replacement cost per sq ft in Texas?
In Texas, installed siding runs about $4.9–$15.7 per sq ft depending on material (vinyl siding $4.9–$9.8, engineered wood $7.8–$13.7, fiber cement (hardie) $8.8–$15.7). That's about 2% below the national average.
Do I need a permit for siding replacement in Texas?
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do siding replacement in Texas?
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times. Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
How much does new siding cost in 2026?
For ~1,500 sq ft of wall, vinyl siding typically runs $8,000–$15,000 installed, while fiber-cement (Hardie board) runs about $14,000–$24,000. Exact cost depends on material, home size and local labor — the calculator gives a localized range.
Vinyl vs fiber cement — which should I pick?
Vinyl is cheaper and low-maintenance; fiber cement costs 50–80% more but resists fire, rot and impact, holds paint for 10–15 years, and adds more resale value. Fiber cement is popular in wildfire and high-humidity regions.
Does new siding add home value?
Yes — exterior siding is consistently one of the highest-ROI remodels, often recouping 60–80% of its cost at resale, with fiber cement typically at the top of that range.
Top cities in Texas
Metro-level siding replacement costs — usually a bit above the Texas state average.