AnyCosterEstimate a project
2% vs national

Roof Replacement Cost in Texas (2026)

Roof Replacement in Texas runs about 2% below the national average. A typical 1,700 sq ft project starts around $7,500$13,330 for 3-tab asphalt shingle. Estimate your exact project below.

Texas sits slightly below the national average on cost overall, though booming metros like Austin, Dallas, and Houston can run higher and keep trades in strong demand.

Reviewed by the AnyCoster Research Team · How we estimate costs

Roof Replacement Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Roughly your home's footprint × 1.4 for a typical pitch.

Estimated installed cost in Texas
$7,500$13,330
Typical $10,415 · 3-tab asphalt shingle · 1,700 sq ft
$7,500$26,660

Ballpark estimate for planning — not a quote.

Get your exact price from local roofing pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Roof Replacement cost in Texas by material

Installed cost for a typical 1,700 sq ft project in Texas.

MaterialPer sq ftTypical TX project
3-tab asphalt shingle$4.4–$7.8$7,500$13,330
Architectural shingle$5.9–$10.8$10,000$18,330
Standing-seam metal$8.8–$15.7$14,990$26,660

What affects your Texas cost

  • Roof pitch & number of stories (steep/tall roofs cost more to work on)
  • Tear-off & disposal of the old roof (1–2 layers)
  • Decking repairs found after tear-off
  • Flashing, vents, valleys and skylights
  • Local labor rates and permit fees

Roof Replacement in Texas: local factors that move the price

Climate & weather

Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.

Regional norms in Texas

Brick and stucco exteriors are common, with hail-rated roofing inland and wind-rated materials near the coast.

Best time to schedule

Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times.

Permits & code

Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions.

Texas roof replacement — FAQ

How much does roof replacement cost in Texas?

In Texas, a typical 1,700 sq ft roof replacement project runs about $7,500–$13,330 for 3-tab asphalt shingle, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.

How much does roof replacement cost per sq ft in Texas?

In Texas, installed roofing runs about $4.4–$15.7 per sq ft depending on material (3-tab asphalt shingle $4.4–$7.8, architectural shingle $5.9–$10.8, standing-seam metal $8.8–$15.7). That's about 2% below the national average.

Do I need a permit for roof replacement in Texas?

Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.

When is the best time to do roof replacement in Texas?

Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times. Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.

How much does it cost to replace a roof in 2026?

For a typical single-family home (~1,700 sq ft of roof), an asphalt-shingle replacement usually runs about $8,000–$14,000 installed, while standing-seam metal can run $16,000–$28,000. Your exact price depends on roof size, pitch, material and local labor — use the calculator above for a localized range.

What's the biggest factor in roofing cost?

Material and roof size dominate, but pitch and stories matter a lot: a steep or multi-story roof is slower and riskier to work on, so labor climbs. Tear-off of multiple old layers and hidden decking damage are the most common budget surprises.

Is a metal roof worth the extra cost?

Metal costs roughly 2–3× asphalt up front but lasts 40–70 years vs 15–25 for asphalt, and can lower cooling bills. It's often worth it if you plan to stay long-term; for a short hold, architectural shingles usually offer the best value.

Top cities in Texas

Metro-level roof replacement costs — usually a bit above the Texas state average.

Roof Replacement cost in other states

← All roof replacementcost info & all 50 states