Gutter Replacement Cost in Washington (2026)
Gutter Replacement in Washington runs about 15% above the national average. A typical 200 linear ft project starts around $1,380–$3,450 for seamless aluminum. Estimate your exact project below.
Washington runs above the national average on cost, driven by a strong Seattle-area labor market and a higher cost of living west of the Cascades.
Reviewed by the AnyCoster Research Team · How we estimate costs
Gutter Replacement Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Total run of gutters — roughly the perimeter of your roofline.
Ballpark estimate for planning — not a quote.
Get your exact price from local gutters pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Washington.
Gutter Replacement cost in Washington by material
Installed cost for a typical 200 linear ft project in Washington.
| Material | Per linear ft | Typical WA project |
|---|---|---|
| Seamless aluminum | $6.9–$17.3 | $1,380 – $3,450 |
| Steel | $10.3–$23.0 | $2,070 – $4,600 |
| Copper | $28.7–$51.7 | $5,750 – $10,350 |
What affects your Washington cost
- Material (aluminum vs steel vs copper)
- Number of stories and roofline complexity
- Downspouts and gutter guards
- Old-gutter removal and fascia repair
- Local labor rates
Gutter Replacement in Washington: local factors that move the price
Climate & weather
Wet, mild winters west of the Cascades bring persistent rain, so drainage, rot resistance, and mold-resistant finishes are essential, while the drier east is hotter and sunnier. Seismic risk is a significant regional concern.
Regional norms in Washington
Wood and fiber-cement siding with pitched roofs and robust gutter systems suit the wet western climate.
Best time to schedule
The drier summer months are strongly preferred for exterior work west of the Cascades.
Permits & code
Washington enforces a statewide code with strong energy provisions, and permits are generally required for structural, roofing, and electrical work, with seismic considerations in construction.
Washington gutter replacement — FAQ
How much does gutter replacement cost in Washington?
In Washington, a typical 200 linear ft gutter replacement project runs about $1,380–$3,450 for seamless aluminum, installed. That's about 15% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does gutter replacement cost per linear ft in Washington?
In Washington, installed gutters runs about $6.9–$51.7 per linear ft depending on material (seamless aluminum $6.9–$17.3, steel $10.3–$23.0, copper $28.7–$51.7). That's about 15% above the national average.
Do I need a permit for gutter replacement in Washington?
Washington enforces a statewide code with strong energy provisions, and permits are generally required for structural, roofing, and electrical work, with seismic considerations in construction. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do gutter replacement in Washington?
The drier summer months are strongly preferred for exterior work west of the Cascades. Wet, mild winters west of the Cascades bring persistent rain, so drainage, rot resistance, and mold-resistant finishes are essential, while the drier east is hotter and sunnier. Seismic risk is a significant regional concern.
How much does gutter replacement cost in 2026?
Seamless aluminum gutters run about $6–$15 per linear foot installed, so a typical 200-foot home runs $1,200–$3,000. Copper costs far more ($5,000–$9,000). Gutter guards and multi-story access add to the price.
Are seamless gutters better than sectional?
Seamless gutters are cut on-site to length, so they have far fewer joints to leak or clog. They cost a bit more than sectional but are the standard professional choice and last longer.
Top cities in Washington
Metro-level gutter replacement costs — usually a bit above the Washington state average.