Fence Installation Cost in Pennsylvania (2026)
Fence Installation in Pennsylvania runs about 5% above the national average. A typical 150 linear ft project starts around $1,580–$3,150 for chain-link. Estimate your exact project below.
Pennsylvania runs modestly above the national average on cost, with prices higher around Philadelphia and Pittsburgh and more affordable in rural areas.
Reviewed by the AnyCoster Research Team · How we estimate costs
Fence Installation Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Total run of fence around the area you want enclosed.
Ballpark estimate for planning — not a quote.
Get your exact price from local fencing pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Pennsylvania.
Fence Installation cost in Pennsylvania by material
Installed cost for a typical 150 linear ft project in Pennsylvania.
| Material | Per linear ft | Typical PA project |
|---|---|---|
| Chain-link | $10.5–$21.0 | $1,580 – $3,150 |
| Wood privacy | $18.9–$36.8 | $2,840 – $5,510 |
| Vinyl | $26.3–$47.3 | $3,940 – $7,090 |
| Aluminum / ornamental | $31.5–$57.8 | $4,730 – $8,660 |
What affects your Pennsylvania cost
- Material and fence height
- Number of gates
- Terrain, slope and post depth
- Old-fence removal
- Local labor and permit rules
Fence Installation in Pennsylvania: local factors that move the price
Climate & weather
Cold, snowy winters and humid summers create freeze-thaw stress, and older housing stock across the state raises weatherization and moisture considerations. Snow load matters in the north and at elevation.
Regional norms in Pennsylvania
Brick, stone, and vinyl siding with pitched roofs are common across the state.
Best time to schedule
Late spring through fall is the reliable window before winter cold sets in.
Permits & code
Pennsylvania enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with local variation in enforcement.
Pennsylvania fence installation — FAQ
How much does fence installation cost in Pennsylvania?
In Pennsylvania, a typical 150 linear ft fence installation project runs about $1,580–$3,150 for chain-link, installed. That's about 5% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does fence installation cost per linear ft in Pennsylvania?
In Pennsylvania, installed fencing runs about $10.5–$57.8 per linear ft depending on material (chain-link $10.5–$21.0, wood privacy $18.9–$36.8, vinyl $26.3–$47.3, aluminum / ornamental $31.5–$57.8). That's about 5% above the national average.
Do I need a permit for fence installation in Pennsylvania?
Pennsylvania enforces a statewide building code, and permits are generally required for structural, roofing, and electrical work, with local variation in enforcement. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do fence installation in Pennsylvania?
Late spring through fall is the reliable window before winter cold sets in. Cold, snowy winters and humid summers create freeze-thaw stress, and older housing stock across the state raises weatherization and moisture considerations. Snow load matters in the north and at elevation.
How much does a fence cost in 2026?
For a 150-foot run, a wood privacy fence usually runs $2,700–$5,300, vinyl $3,800–$6,800, and chain-link $1,500–$3,000, installed. Height, gates and terrain change the number — the calculator localizes it.
What's the cheapest fence that still looks good?
Wood (cedar or pine pickets) gives the best looks-per-dollar for privacy. Chain-link is cheaper but offers no privacy. Vinyl costs more up front but never needs painting, so it can be cheaper over 15+ years.
Top cities in Pennsylvania
Metro-level fence installation costs — usually a bit above the Pennsylvania state average.