Fence Installation Cost in Maryland (2026)
Fence Installation in Maryland runs about 10% above the national average. A typical 150 linear ft project starts around $1,650–$3,300 for chain-link. Estimate your exact project below.
Maryland runs above the national average on cost, reflecting a high cost of living and a competitive labor market in the Baltimore-Washington corridor.
Reviewed by the AnyCoster Research Team · How we estimate costs
Fence Installation Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Total run of fence around the area you want enclosed.
Ballpark estimate for planning — not a quote.
Get your exact price from local fencing pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Maryland.
Fence Installation cost in Maryland by material
Installed cost for a typical 150 linear ft project in Maryland.
| Material | Per linear ft | Typical MD project |
|---|---|---|
| Chain-link | $11.0–$22.0 | $1,650 – $3,300 |
| Wood privacy | $19.8–$38.5 | $2,970 – $5,780 |
| Vinyl | $27.5–$49.5 | $4,130 – $7,430 |
| Aluminum / ornamental | $33.0–$60.5 | $4,950 – $9,080 |
What affects your Maryland cost
- Material and fence height
- Number of gates
- Terrain, slope and post depth
- Old-fence removal
- Local labor and permit rules
Fence Installation in Maryland: local factors that move the price
Climate & weather
Humid summers, cold winters, and Chesapeake Bay and coastal exposure bring moisture, freeze-thaw, and occasional storm-surge concerns. Drainage and weatherproofing matter across the state.
Regional norms in Maryland
Brick and vinyl siding are common, with elevated or flood-aware construction near the bay and shore.
Best time to schedule
Spring and fall are the most comfortable seasons for exterior projects.
Permits & code
Most Maryland jurisdictions require permits for structural, roofing, and electrical work, with Critical Area and flood rules applying near the bay.
Maryland fence installation — FAQ
How much does fence installation cost in Maryland?
In Maryland, a typical 150 linear ft fence installation project runs about $1,650–$3,300 for chain-link, installed. That's about 10% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does fence installation cost per linear ft in Maryland?
In Maryland, installed fencing runs about $11.0–$60.5 per linear ft depending on material (chain-link $11.0–$22.0, wood privacy $19.8–$38.5, vinyl $27.5–$49.5, aluminum / ornamental $33.0–$60.5). That's about 10% above the national average.
Do I need a permit for fence installation in Maryland?
Most Maryland jurisdictions require permits for structural, roofing, and electrical work, with Critical Area and flood rules applying near the bay. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do fence installation in Maryland?
Spring and fall are the most comfortable seasons for exterior projects. Humid summers, cold winters, and Chesapeake Bay and coastal exposure bring moisture, freeze-thaw, and occasional storm-surge concerns. Drainage and weatherproofing matter across the state.
How much does a fence cost in 2026?
For a 150-foot run, a wood privacy fence usually runs $2,700–$5,300, vinyl $3,800–$6,800, and chain-link $1,500–$3,000, installed. Height, gates and terrain change the number — the calculator localizes it.
What's the cheapest fence that still looks good?
Wood (cedar or pine pickets) gives the best looks-per-dollar for privacy. Chain-link is cheaper but offers no privacy. Vinyl costs more up front but never needs painting, so it can be cheaper over 15+ years.
Top cities in Maryland
Metro-level fence installation costs — usually a bit above the Maryland state average.