Deck Building Cost in Texas (2026)
Deck Building in Texas runs about 2% below the national average. A typical 320 sq ft project starts around $4,700–$7,840 for pressure-treated wood. Estimate your exact project below.
Texas sits slightly below the national average on cost overall, though booming metros like Austin, Dallas, and Houston can run higher and keep trades in strong demand.
Reviewed by the AnyCoster Research Team · How we estimate costs
Deck Building Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Length × width of the deck surface. A 16×20 deck is 320 sq ft.
Ballpark estimate for planning — not a quote.
Get your exact price from local deck pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Texas.
Deck Building cost in Texas by material
Installed cost for a typical 320 sq ft project in Texas.
| Material | Per sq ft | Typical TX project |
|---|---|---|
| Pressure-treated wood | $14.7–$24.5 | $4,700 – $7,840 |
| Cedar / redwood | $24.5–$39.2 | $7,840 – $12,540 |
| Composite (Trex-style) | $29.4–$58.8 | $9,410 – $18,820 |
What affects your Texas cost
- Decking material and railing style
- Height off the ground and stairs
- Footings, framing and permits
- Built-ins (benches, pergola, lighting)
- Local labor rates
Deck Building in Texas: local factors that move the price
Climate & weather
Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
Regional norms in Texas
Brick and stucco exteriors are common, with hail-rated roofing inland and wind-rated materials near the coast.
Best time to schedule
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times.
Permits & code
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions.
Texas deck building — FAQ
How much does deck building cost in Texas?
In Texas, a typical 320 sq ft deck building project runs about $4,700–$7,840 for pressure-treated wood, installed. That's about 2% below the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does deck building cost per sq ft in Texas?
In Texas, installed deck runs about $14.7–$58.8 per sq ft depending on material (pressure-treated wood $14.7–$24.5, cedar / redwood $24.5–$39.2, composite (trex-style) $29.4–$58.8). That's about 2% below the national average.
Do I need a permit for deck building in Texas?
Permitting varies by city, with major metros requiring permits for structural, roofing, and electrical work, and coastal areas adding wind provisions. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do deck building in Texas?
Spring and fall are best; midsummer heat can slow crews and affect concrete and coating cure times. Conditions vary widely, from Gulf Coast hurricanes and humidity to inland heat, drought, hail, and expansive clay soils that stress foundations. Heat- and wind-resistant materials and proper foundation design both matter.
How much does it cost to build a deck in 2026?
A typical 320 sq ft deck runs about $5,000–$8,000 in pressure-treated wood, or $10,000–$19,000 in composite, installed. Size, height, railings and material drive the price — use the calculator for a localized estimate.
Is composite decking worth it?
Composite costs roughly 1.5–2× wood up front but eliminates staining/sealing and lasts 25–30+ years, so total cost of ownership is often lower. It's the popular choice for homeowners who don't want annual maintenance.
Top cities in Texas
Metro-level deck building costs — usually a bit above the Texas state average.