AnyCosterEstimate a project
+24% vs national

Concrete Patio & Driveway Cost in San Diego (2026)

Concrete Patio & Driveway in San Diego runs about 24% above the national average. A typical 600 sq ft project starts around $4,460$8,930 for standard broom finish. Estimate your exact San Diego project below.

Concrete Patio & Driveway Cost Calculator

Adjust the details for an installed-cost range tailored to you.

Material

Length × width of the slab. A 2-car driveway is ~600 sq ft.

Estimated installed cost in California
$4,540$9,070
Typical $6,805 · Standard broom finish · 600 sq ft
$4,540$21,170

Ballpark estimate for planning — not a quote.

Get your exact price from local concrete pros

This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in California.

Licensed & insured prosWe only share your details with the pros you requestFree · no obligation

Concrete Patio & Driveway cost in San Diego by material

Installed cost for a typical 600 sq ft project in San Diego.

MaterialPer sq ftTypical San Diego project
Standard broom finish$7.4–$14.9$4,460$8,930
Stamped / colored$14.9–$24.8$8,930$14,880
Paver equivalent$18.6–$34.7$11,160$20,830

What affects your San Diego cost

  • Finish (plain vs stamped/colored)
  • Slab thickness and rebar/mesh reinforcement
  • Site prep, grading and old-slab removal
  • Access for the concrete truck
  • Local labor and material prices

San Diego concrete patio & driveway — FAQ

How much does concrete patio & driveway cost in San Diego?

In San Diego, a typical 600 sq ft concrete patio & driveway project runs about $4,460–$8,930 for standard broom finish, installed. That's about 24% above the national average — metro labor and permit costs in San Diego tend to run higher than the California state average. Use the calculator above for your exact size and material.

How much does concrete patio & driveway cost per sq ft in San Diego?

In San Diego, installed concrete runs about $7.4–$34.7 per sq ft depending on material (standard broom finish $7.4–$14.9, stamped / colored $14.9–$24.8, paver equivalent $18.6–$34.7). That's about 24% above the national average.

How much does a concrete driveway cost in 2026?

A standard ~600 sq ft concrete driveway runs about $3,600–$7,200 installed; stamped or colored concrete runs $7,200–$12,000. Thickness, finish and site prep drive the price — use the calculator for your area.

Is stamped concrete worth the extra cost?

Stamped concrete costs about 2× plain but mimics stone, brick or pavers at a lower price than the real thing, and is a single poured surface with fewer weeds/settling issues than pavers. Good middle ground for looks vs budget.

Concrete Patio & Driveway cost across California

San Diego runs about 24% above the national average. See the full California breakdown and statewide averages.

Concrete Patio & Driveway cost in California