Gutter Replacement Cost in Illinois (2026)
Gutter Replacement in Illinois runs about 8% above the national average. A typical 200 linear ft project starts around $1,300–$3,240 for seamless aluminum. Estimate your exact project below.
Illinois runs above the national average on cost, with the Chicago metro labor market and its prevailing wages a major driver, while downstate areas tend to be more affordable.
Reviewed by the AnyCoster Research Team · How we estimate costs
Gutter Replacement Cost Calculator
Adjust the details for an installed-cost range tailored to you.
Total run of gutters — roughly the perimeter of your roofline.
Ballpark estimate for planning — not a quote.
Get your exact price from local gutters pros
This is a ballpark — compare up to 3 free, no-obligation quotes from vetted contractors in Illinois.
Gutter Replacement cost in Illinois by material
Installed cost for a typical 200 linear ft project in Illinois.
| Material | Per linear ft | Typical IL project |
|---|---|---|
| Seamless aluminum | $6.5–$16.2 | $1,300 – $3,240 |
| Steel | $9.7–$21.6 | $1,940 – $4,320 |
| Copper | $27.0–$48.6 | $5,400 – $9,720 |
What affects your Illinois cost
- Material (aluminum vs steel vs copper)
- Number of stories and roofline complexity
- Downspouts and gutter guards
- Old-gutter removal and fascia repair
- Local labor rates
Gutter Replacement in Illinois: local factors that move the price
Climate & weather
Cold, snowy winters and hot, humid summers create strong freeze-thaw stress, and the state's exposure to severe storms and occasional tornadoes matters for exterior durability. Wind and moisture management are both relevant.
Regional norms in Illinois
Brick and vinyl siding are common, with steeply pitched roofs to shed snow.
Best time to schedule
Late spring through fall is the reliable window for exterior work before winter cold sets in.
Permits & code
Chicago and many Illinois municipalities enforce their own building codes and require permits for structural, roofing, and electrical work.
Illinois gutter replacement — FAQ
How much does gutter replacement cost in Illinois?
In Illinois, a typical 200 linear ft gutter replacement project runs about $1,300–$3,240 for seamless aluminum, installed. That's about 8% above the national average. Higher-end materials cost more — use the calculator above for your exact size and material.
How much does gutter replacement cost per linear ft in Illinois?
In Illinois, installed gutters runs about $6.5–$48.6 per linear ft depending on material (seamless aluminum $6.5–$16.2, steel $9.7–$21.6, copper $27.0–$48.6). That's about 8% above the national average.
Do I need a permit for gutter replacement in Illinois?
Chicago and many Illinois municipalities enforce their own building codes and require permits for structural, roofing, and electrical work. Always confirm requirements with your local building department, and factor permit time and inspections into your schedule.
When is the best time to do gutter replacement in Illinois?
Late spring through fall is the reliable window for exterior work before winter cold sets in. Cold, snowy winters and hot, humid summers create strong freeze-thaw stress, and the state's exposure to severe storms and occasional tornadoes matters for exterior durability. Wind and moisture management are both relevant.
How much does gutter replacement cost in 2026?
Seamless aluminum gutters run about $6–$15 per linear foot installed, so a typical 200-foot home runs $1,200–$3,000. Copper costs far more ($5,000–$9,000). Gutter guards and multi-story access add to the price.
Are seamless gutters better than sectional?
Seamless gutters are cut on-site to length, so they have far fewer joints to leak or clog. They cost a bit more than sectional but are the standard professional choice and last longer.
Top cities in Illinois
Metro-level gutter replacement costs — usually a bit above the Illinois state average.